Jinan MT Machinery Co., Ltd.

Aquatic Feed Application

Shrimp & Crab Feed

Shrimp and crab farms and specialist feed mills need small, dense pellets for animals that graze slowly on the pond bottom. Because crustaceans nibble rather than swallow feed whole, the pellet must stay intact in water far longer than typical…

Complete feed lines and single machines from Jinan MT Machinery, a twin-screw extruder manufacturer in Shandong, China, supplying feed plants in more than 60 countries.

Export countries
60+
Lines delivered
1,000+
Global customers
500+
Production base
20,000 m²
Shrimp & Crab Feed on a twin-screw extrusion feed line

Application Overview

What to Check When Equipping for Shrimp & Crab Feed

The right line starts from your pellet target, local raw materials and required output. The extruder, die and dryer are then matched to those three inputs.

Shrimp and crab farms and specialist feed mills need small, dense pellets for animals that graze slowly on the pond bottom. Because crustaceans nibble rather than swallow feed whole, the pellet must stay intact in water far longer than typical fish feed. Buyers focus on water stability, uniform pellet size and limiting nutrient loss to the pond.

  • Test water stability on your own recipe, since shrimp and crabs feed slowly and a pellet that breaks down early is wasted.
  • Grind raw materials finely and condition the mash thoroughly so that small pellets bind well and hold together.
  • Select die and cutter settings for the small, uniform pellet sizes required at each culture stage.
  • Control the drying and cooling stages carefully to reach a safe storage moisture without cracking dense pellets.

Machine Categories

Machine Categories for Shrimp & Crab Feed

These Jinan MT Machinery categories are matched to this feed type and are available as complete lines or single machines.

Equipment

Machines Used for Shrimp & Crab Feed

Each machine below suits this application, and output, die, screw configuration and heating method can be built to your plant.

View All Feed Machines
Packing for export

Packing & shipping

Packed for international transport. Send us your port or address for freight and lead time.

★★★★★
“Floating pellets hold on the water for over six hours. On our old line half the feed sank within 30 minutes and we lost money on every bag.”
— Emeka Nwosu, Plant Owner, Delta Aqua Feed, Nigeria
Overseas buyers inspecting a twin-screw extruder on the factory floor Visitors and engineers discussing feed machinery beside the production line Customer team walking through the feed machine workshop

Recipe Verification

Prove Your Recipe Before You Buy the Line

Jinan MT Machinery runs formula tests and lets buyers trial their own raw materials at our Shandong factory, so pellet quality is confirmed before the contract is signed.

  • Formula testing

    Adjust your recipe on working equipment and find the settings that reach the expansion you need.

  • Your local raw materials

    Bring the corn, cassava or soybean meal you will buy at home and trial it on the machine.

  • Pellets you can inspect

    Check size, shape and water behaviour yourself, then have the screw, die and heating built around that result.

"They tested our local cassava and rice bran blend at their factory before we signed, and the expansion ratio we got on site matched what they promised."
Pham Quoc BaoPham Quoc BaoTechnical Director, Mekong Aqua Feed, Vietnam
Book a Raw Material Trial

Line Configuration

How Five Line Sections Shape the Pellet

Pellet quality is set across five linked sections. Jinan MT Machinery sizes each one to your feed type, so the MT75 twin-screw extruder and the equipment around it run as one system under PLC/MCC control.

Twin-screw extruder and conveyors assembled in the production workshop
  1. Conditioning

    Steam and moisture pre-cook the mash. Weak conditioning leaves pellets that break apart in water.

  2. Extrusion

    Screw configuration, heat and shear control expansion, which decides whether the pellet floats or sinks.

  3. Die Cutting

    Die openings and cutter speed set diameter, length and shape, and keep the size distribution tight.

  4. Drying

    Too little drying leads to mould in storage. Too much wastes energy, so the dryer is sized to the feed.

  5. Oil Spraying

    An even oil coat after drying adds energy and palatability and gives the pellet a smoother finish.

Export wooden crates of feed machinery being loaded for shipment

Our engineers install and commission your line on site and train your operators to run it.

Plan Your Installation

Technical Articles

Further Reading on Shrimp & Crab Feed

These articles cover the process and equipment decisions behind this feed type.

Project Inquiry

Get a Line Plan for Shrimp & Crab Feed

Jinan MT Machinery replies within 24 hours and prepares a free process plan with a CAD or 3D workshop layout and an itemized technical quote.