"Floating pellets hold on the water for over six hours. On our old line half the feed sank within 30 minutes and we lost money on every bag."
Emeka NwosuPlant Owner, Delta Aqua Feed, Nigeria
Applications
The same twin-screw extrusion process makes floating, sinking, shrimp, crab and starter feed from 0.9 to 15 mm. You change the die, screw combination and settings to match your species and pellet size.
Feed Types
Each application below leads to the machines built for that feed. Choose your feed type to see the matching equipment from Jinan MT Machinery.
Tilapia and catfish farms and the feed mills supplying them use twin-screw extrusion lines to produce floating pellets from local raw materials such as…
floating fish feed machine
View products
Farms raising bottom-feeding species need dense pellets that sink quickly and stay intact until the fish reach them, produced on sinking feed lines or…
sinking fish feed machine · floating fish feed machine
View products
Shrimp and crab farms and specialist feed mills need small, dense pellets for animals that graze slowly on the pond bottom. Because crustaceans nibble…
other aquactic feed machine · sinking fish feed machine
View products
Hatcheries, nurseries and feed mills serving them produce fine starter feed for fry, working at the small end of the 0.9–15 mm pellet range.…
floating fish feed machine · sinking fish feed machine
View productsLine Selection
Species, pellet size, raw material and climate set the core configuration. Answer these four and the die, screw combination, conditioning and dryer follow.
Co-rotating twin-screw, PLC/MCC control
Feeding depth decides floating or sinking. Tilapia and catfish take floating pellets at the surface, while bottom feeders need pellets that sink to them. Extrusion settings and the die control the pellet's behaviour in water.
Pellet size decides the die. Our range runs from 0.9 to 15 mm, covering fry starter feed through grower pellets. Our R&D team designs dies in-house, so opening and shape are built around your product.
Raw material decides the screw combination and conditioning. Corn, cassava and soybean meal cook and expand differently, so a recipe that works elsewhere may not reach the expansion you need. We set both around your formula.
Moisture and local climate decide the dryer. Under-dried pellets go mouldy in storage, and over-drying wastes energy. We size the dryer to your conditions and match the heating method to the heat source on your site.
Water Stability
Our customers report floating pellets that hold for over six hours and shrimp pellets that stay intact for three. Here is how two of them describe it.
"Floating pellets hold on the water for over six hours. On our old line half the feed sank within 30 minutes and we lost money on every bag."
Emeka NwosuPlant Owner, Delta Aqua Feed, Nigeria
Packed for export
Wooden cases with rust and moisture protection
"Shrimp feed with high water stability - the pellet holds three hours in water without breaking, which our customers test themselves."
Agus PrasetyoOwner, Prasetyo Akuakultur, Indonesia
Local Raw Materials
You can run your own formula on our machines before you order. Bring the raw materials you buy locally to Jinan MT Machinery in Shandong, China, and judge the pellets yourself.
Production base with test workshop
Who We Build For
Feed plant investors get one manufacturer for the whole line. Dealers get factory-built equipment under an OEM/ODM arrangement, with parts support behind every unit.

For aquaculture farms and project owners who need a complete, connected line.

For feed machinery dealers and equipment traders. We work with 30+ OEM partners.
We plan the process, draw the layout, test the full line and commission it at your plant, so all sections work together from the first run.
Free process advice and an itemised technical quotation within 24 hours.
Workshop layouts that connect every section before you build.
Every line runs before leaving the factory. Third-party inspection is available.
Our engineers commission the line on site and train your operators.
FAQ
One MT75 line can serve several feed types, and most configuration choices come down to your species, recipe and climate.
Yes. The MT75 co-rotating twin-screw extruder switches between floating and sinking feed by changing the die and settings. You do not need a second line, and PLC/MCC control keeps production consistent after each changeover.
Our fish feed lines produce pellets from 0.9 to 15 mm. The range covers fry starter feed through grower pellets. The die sets the size, and it can be customised to your product.
Yes. You can visit our factory and run your own raw materials, such as corn, cassava and soybean meal, on our machines. We also offer formula testing, so you can see the finished pellets before you sign.
We configure drying around your product, local climate and available heat source. Correct sizing helps prevent mould from under-drying and wasted energy from over-drying. Share your local voltage and heat source and we will build them into the process plan.
Start Your Project
Tell us your species, target output and raw materials. Jinan MT Machinery replies within 24 hours with a process recommendation and an itemised quotation.