Jinan MT Machinery Co., Ltd.
Floating Sinking Fish Feed Production Line Dry Pet Food Extruder Machine
Floating Sinking Fish Feed Production Line Dry Pet Food Extruder MachineFloating Sinking Fish Feed Production Line Dry Pet Food Extruder MachineFloating Sinking Fish Feed Production Line Dry Pet Food Extruder MachineFloating Sinking Fish Feed Production Line Dry Pet Food Extruder MachineFloating Sinking Fish Feed Production Line Dry Pet Food Extruder Machine

Product Details

About Floating Sinking Fish Feed Production Line Dry Pet Food Extruder Machine

Customized screw and die — We configure the co-rotating twin-screw extruder and mold heads strictly according to your specific formula and local raw materials like cassava or corn to ensure stable extrusion.

Technical Specifications

Parameter Value
Product Type Floating Sinking Fish Feed Production Line
Capacity 100 kg/h to 3 ton/h
Main Extruder Twin-screw extruder
Screw Type Co-rotating twin screw with building block system structure
Total Installed Power 70 kW to 410 kW
Heating Method Electricity, steam, gas, oil
Control System Frequency converter (LC brand), electric parts (ABB)
Material of Construction Food-grade stainless steel (SUS201, SUS304)
Power Supply Three-phase 380V / 415V / 440V (customizable)
Product Size 0.9 to 15 mm
Raw Materials Corn meal, soybean meal, cracked wheat, barley, meat, meat by-products, vitamins, minerals
Certification CE
Origin Shandong, China

Target Aquaculture Segments

Industry Segment Typical Products
Tilapia & Catfish Farms Floating pellets 2-6 mm
Bottom-Feeding Species Sinking carp pellets 3-8 mm
Shrimp & Crab Ponds Sinking shrimp feed 1-2 mm
Hatcheries Fry starter feed 0.9-1.5 mm

Why Half the Floating Feed Ends Up on the Pond Bottom

Inconsistent buoyancy ruins feed conversion ratios and pollutes water quality. During a freezing winter project in Kazakhstan, we faced a nightmare where half the floating pellets sank because the steam heating setup failed to maintain preconditioning temperatures. This harsh reality proved that a floating and sinking fish feed production line manufacturer must verify every heating detail and screw configuration before shipment. Poor adaptation to local raw materials like cassava or high-moisture corn often leads to unstable expansion and irregular pellet shapes. High energy consumption and lack of overseas technical support further drain your operational budget when the line goes down.

Floating and sinking fish feed production line layout

Integrating the Line into Your Aquafeed Workflow

A reliable floating and sinking fish feed production line manufacturer designs the entire workflow around your specific facility constraints and target species. We provide comprehensive process consultation, CAD layouts, and OEM/ODM customization to ensure every section fits your production floor. Before finalizing the setup, we encourage buyers to bring local raw materials to our factory for live extrusion trials, guaranteeing the line meets your exact buoyancy and size requirements.

Overcoming Raw Material and Processing Challenges

Local raw materials vary wildly in starch content, fiber, and moisture, directly impacting the extrusion process. Adjusting the screw configuration inside the building block system allows the machine to handle diverse recipes, from high-corn formulations to protein-rich fish meal blends. Controlling moisture and gelatinization during the cooking phase is critical for achieving the desired floating or sinking performance. Additionally, managing oil and seasoning application ensures the final pellets meet nutritional standards without becoming overly greasy. Selecting the right heating method for the dryer matches your local energy costs while maintaining storage stability.

Core Equipment Sections Explained

The mixer ensures uniform distribution of powder and liquid ingredients before feeding. A screw conveyor delivers the blend steadily into the twin-screw extruder, where high temperature and pressure cook the materials into pellets. An air conveyor transports the wet pellets gently to minimize breakage. The multi-layer dryer reduces moisture content, while the oil sprayer and flavoring drum apply necessary fats and attractants. Finally, the cooler sets the pellet shape, and the packing machine weighs the finished product for storage.

Twin-screw extruder and multi-layer dryer for fish feed

Hidden Costs of Choosing the Wrong Line

Purchasing an unverified line often results in sinking pellets when you need floating feed, leading to massive waste and angry end-users. Inadequate drying causes moldy stock, ruining entire batches and damaging your brand reputation. Irregular shapes and oily chips indicate poor cutter alignment or improper seasoning application, making the feed unappealing to aquatic species. A bottleneck section, like an undersized dryer or weak cooler, forces the entire line to idle, destroying your daily output targets.

Why Source This Equipment from Us

We run every line in our dedicated testing workshop before shipment, ensuring the twin-screw extruder handles your specific formula perfectly. Our engineers configure the screw elements and steam valves to match your local climate, preventing the buoyancy issues we witnessed in colder regions. We use food-grade SUS304 stainless steel for contact parts, ensuring feed safety and long-term durability against corrosion. Our team provides on-site installation, operator training, and lifetime remote technical support via video call to keep your mill running smoothly. Every project includes a 12-month warranty and priority spare parts dispatch to eliminate prolonged downtime.

Documentation & Delivery

  • CE certificate and ISO 9001:2015 quality management records
  • Factory test-run video using your specific raw materials
  • Detailed packing list and commercial customs documents
  • Export wooden crates with anti-rust and moisture protection
  • Itemized technical quotation and CAD plant layouts

Installation, Utilities & Maintenance

  • Confirm three-phase power supply and voltage compatibility before installation
  • Connect steam or gas lines for the dryer based on local energy availability
  • Verify floor layout and ceiling height for the multi-layer dryer setup
  • Ensure stable water and compressed air supply for the seasoning system
  • Schedule regular die and cutter blade replacement to maintain pellet shapes
  • Conduct routine screw element wear checks inside the extruder barrel
  • Clean the dryer and oil sprayer regularly to prevent cross-contamination
  • Train local operators on daily maintenance and safety protocols

Start Your Custom Project Today

To proceed, please provide your target aquatic species, desired pellet sizes, target hourly capacity, and preferred raw materials. Share your available heating sources, local voltage, and factory dimensions so we can design the optimal layout. You will receive a comprehensive line proposal, 3D layout, and itemized quote within 24 hours, along with an invitation to run trials at our facility.

Frequently Asked Questions

Q: How to determine the complete line configuration based on target species and capacity?
A: The configuration depends on your required hourly output and the specific buoyancy needed for your aquatic species. We select the appropriate extruder model, screw combination, and dryer size to ensure precise floating or sinking performance. Sharing your target species and capacity allows us to design a matched system.

Q: Can the twin-screw extruder process local raw materials like cassava and corn?
A: Yes, the co-rotating twin-screw extruder features a flexible building block screw structure that adapts to various local ingredients. By adjusting the screw configuration and processing temperatures, we ensure proper gelatinization and expansion even with high-starch or high-fiber local materials.

Q: What is the difference between single-screw and twin-screw extruders for aquatic feed?
A: Twin-screw extruders offer superior mixing, self-cleaning, and precise control over shear and temperature compared to single-screw models. This makes them ideal for producing both floating and sinking pellets with consistent density and stable buoyancy from diverse raw material recipes.

Q: How long does it take to change molds for different pellet shapes?
A: Changing the die and cutter to produce different pellet shapes is a quick process designed to minimize downtime. Operators can swap the mold and adjust the cutter speed within minutes, allowing flexible production of various sizes and shapes for different aquatic species.

Q: What does the on-site installation, commissioning, and warranty cover?
A: Our engineers handle full on-site installation, commissioning, and operator training to ensure optimal line performance. The coverage includes a 12-month warranty for all equipment, lifetime remote technical support, and priority dispatch of spare parts at cost to maintain continuous operation.

Factory Trial and Customization

See Your Pellets Before You Sign

Jinan MT Machinery runs trials on your own raw materials at our factory in Shandong, China, and builds each machine around your recipe, output and local utilities.

Overseas buyers watching a twin-screw fish feed extruder run in the factory workshop

Trial Run on Your Own Raw Materials

  • Bring local corn, cassava or soybean meal and run it at our factory.
  • Formula testing helps your technical team confirm expansion and pellet quality.
  • Inspect the pellets and the workshop before production is scheduled.
Book a Raw Material Trial
Technicians assembling a twin-screw extruder and die head on the factory production floor

Die, Screw and Heating Built to Your Spec

  • Custom dies for the pellet sizes and shapes your market buys.
  • Screw combination configured for your recipe and output target.
  • Heating method matched to your local voltage and heat source.
  • OEM and ODM available from our own factory.
Discuss Your Configuration
Wooden export crates with feed machinery being loaded onto a truck at the factory

Delivery and After-Sales

Packed for Export, Installed by Our Engineers

Every order leaves in anti-rust, moisture-proof wooden crates, and our engineers install it on site, train your operators and back it with a 12-month warranty.

Export Packing

  • Wooden export crates
  • Anti-rust and moisture-proof treatment
  • Export logistics arranged with your team

On-Site Commissioning

  • Engineers install at your plant
  • Commissioning on site
  • Hands-on training for your operators

12 months Warranty

  • Spare parts at cost, shipped with priority
  • Parts supply for 10+ years
  • Lifetime remote support by video, WhatsApp and email

FAQ

Questions Before You Order

Buyers of Jinan MT Machinery feed machines most often ask about factory trials, delivery, payment and spare parts.

Can I test the machine with my own raw materials before ordering?

Yes. You can visit our factory and run a trial with your own raw materials before signing the contract. Formula testing is also available, so your technical team can check the results on local ingredients.

What is the delivery time?

Common standard models are in stock and delivered within 10 days. Custom solutions take 30–50 working days. Every line completes a full test run before it leaves the factory.

What payment terms do you accept?

We accept T/T and L/C, usually at sight, as well as Alibaba Trade Assurance. PayPal is available for small orders and Western Union for sample orders. D/P and D/A are considered only for long-term customers with good credit.

How do I get spare parts and support after installation?

Spare parts ship with priority at cost price, and parts supply continues for more than 10 years. The warranty runs 12 months, with lifetime remote support by video, WhatsApp and email. Preventive maintenance, emergency repair and staff training are also available.

What our customers say

★★★★★
“Floating pellets hold on the water for over six hours. On our old line half the feed sank within 30 minutes and we lost money on every bag.”
— Emeka Nwosu, Plant Owner, Delta Aqua Feed, Nigeria
★★★★★
“One MT75 line runs floating tilapia feed and sinking feed for bottom feeders by changing the die and settings. No second line needed.”
— Md. Rafiqul Islam, Production Manager, Padma Fish Feed, Bangladesh
★★★★★
“They tested our local cassava and rice bran blend at their factory before we signed, and the expansion ratio we got on site matched what they promised.”
— Pham Quoc Bao, Technical Director, Mekong Aqua Feed, Vietnam

Talk to the Factory

Get a Quote for Floating Sinking Fish Feed Production Line Dry Pet Food Extruder Machine

We reply within 24 hours with free process advice, a CAD and 3D workshop layout, and an itemized technical quotation.