



Product Details
About Fish Feed Production Line Manufacturer Processing Plant
Custom Screw & Die Config — We reconfigure the MT75 twin-screw extruder on site to stabilize expansion when processing high-proportion local cassava formulas.
Technical Specifications
| Parameter | Value |
|---|---|
| Product Type | Fish Feed Production Line |
| Main Extruder | Twin-Screw Extruder |
| Screw Type | Co-rotating twin-screw |
| Control System | PLC touch screen control |
| Material of Construction | Screw in high-speed alloy steel (38CrMoAl), Gearbox in QT400, Gears in 20CrNiMoA, Dryer mesh in 304 stainless steel |
| Certification | CE, ISO 9001:2015 |
| Origin | Shandong, China |
Application Suitability
| Industry | Typical Products |
|---|---|
| Aquaculture Farms | Tilapia and catfish floating pellets (2-6 mm), carp sinking feed |
| Commercial Feed Mills | Shrimp and crab feed, fry starter feed (0.9-2 mm) |
Why Half the Floating Feed Ends Up on the Pond Bottom
Inconsistent preconditioning and wrong screw configurations cause poor gelatinization and sinking pellets. I recall a tilapia project in Bangladesh where the client used a high proportion of local cassava. Because the preconditioning temperature was off and the screw configuration was wrong, half of the floating fish feed sank to the bottom, and the client was almost ready to reject the batch. We had to reconfigure the extruder and adjust the preconditioner on site to stabilize the expansion degree. A fish feed production line manufacturer must prove every local formula needs real machine trials, not just paper calculations, to avoid unstable extrusion, poor shape retention, and high energy waste in overseas projects.
Integrating the Line into Your Aquafeed Workflow
A reliable fish feed production line manufacturer designs the entire flow from raw material intake to final packing based on your specific species and formula. We provide complete process consultation, CAD and 3D plant layouts, and OEM/ODM customization to fit your existing facility. Before finalizing the setup, you can run trials with your own raw materials at our testing workshop to verify pellet quality and floating performance.
Navigating Raw Material and Processing Challenges
Local formulas vary wildly in starch and protein content, directly affecting the expansion degree and water stability of the final pellets. High-moisture ingredients require precise drying to ensure storage stability, while high-fat formulas demand even oil coating without clogging the system. Switching between floating and sinking diets, or adjusting pellet sizes from 0.9 mm starter feed to 15 mm adult feed, requires quick die and cutter changes. Managing the heat source, whether electric, gas, diesel, or steam, is also critical for maintaining consistent cooking temperatures and controlling operational costs.
Core Processing Sections Explained
The mixer ensures powder and liquid ingredients are blended uniformly before entering the main extrusion zone. The co-rotating twin-screw extruder cooks the mixture under high temperature and pressure, where the screw configuration can be adjusted to control shear and gelatinization. An air conveyor gently transports wet pellets to the multi-layer dryer, which uses a 304 stainless steel mesh to reduce moisture evenly. After drying, the flavoring roller sprays oil and seasoning, while the cooling conveyor brings the pellets to room temperature for stable packing. A sifter separates qualified sizes from fines to ensure a uniform final product.
Hidden Costs of Choosing the Wrong Line
Selecting inadequate equipment often leads to sinking pellets when floating feed is required, causing direct feed waste and poor fish growth. Poorly dried stock develops mold during storage, while irregular shapes and sizes result from unstable cutting and low-quality dies. Excessive fines generation and oily chips indicate flawed coating and cooling sections, creating bottlenecks that leave the main extruder idle. These issues compound into massive financial losses and damaged reputation in competitive aquaculture markets.
Why Source Your Equipment from Us
Every line is run and tested in our dedicated machine testing workshop before shipment, ensuring the screw configuration matches your specific formula. We supply wear-resistant alloy screws and high-precision gearbox components to extend equipment life and reduce maintenance downtime. Our engineers install and commission the line on site, training your operators in operation, maintenance, and safety protocols. We also provide lifetime remote technical support by video call, WhatsApp, and email, with spare parts dispatched at cost. This hands-on approach prevents the exact cassava expansion issues we solved in Bangladesh, guaranteeing your floating and sinking feeds meet strict aquaculture standards.
Documentation & Delivery
- CE certificate and ISO 9001:2015 quality management records
- Factory test-run video demonstrating your specific formula
- Trial report from processing your own raw materials
- Third-party inspection reports if requested
- Packing list, invoices, and customs documents
- Export wooden crates with anti-rust and moisture protection
Installation, Utilities & Maintenance
- Confirm power supply, voltage, and heating method (electric, gas, diesel, or steam) match local plant conditions
- Verify floor layout, ceiling height, and foundation requirements for the multi-layer dryer and hoist
- Ensure adequate water and compressed air supply for the flavoring roller and pneumatic components
- Schedule regular die and cutter blade replacement to maintain precise pellet shapes and sizes
- Conduct routine screw element wear checks and dryer mesh cleaning to preserve throughput
- Perform thorough oil and seasoning system cleaning to prevent cross-contamination between formulas
Requesting a Custom Line Proposal
To get an accurate line proposal, CAD/3D layout, and itemized technical quotation, please provide your target aquatic species, pellet sizes, and daily capacity requirements. Share your raw material formula direction, preferred heating method, local voltage, and available factory dimensions. We will reply within 24 hours and invite you to our factory to run live extrusion trials with your materials.
Frequently Asked Questions
Q: How to determine the complete line configuration based on target capacity and pellet types?
A: The configuration depends on your required hourly output and whether you need floating or sinking pellets. Floating feeds require precise preconditioning and specific screw elements to achieve expansion, while sinking feeds need higher density and different die designs. We customize the mixer, extruder, and dryer capacity to match your exact production goals and species requirements.
Q: Can the twin-screw extruder process local raw materials like cassava effectively?
A: Yes, the co-rotating twin-screw extruder handles diverse local formulas, including high-proportion cassava or rice flour, with proper formula adjustment. The screw configuration and preconditioning temperature must be specifically tuned to manage the unique starch properties and moisture content of these ingredients. We recommend running live trials with your raw materials to verify the expansion degree and pellet stability.
Q: What is the difference between twin-screw and single-screw extruders for aquatic feed?
A: Twin-screw extruders offer superior mixing, self-cleaning, and precise control over shear and temperature compared to single-screw models. This makes them ideal for producing both floating and sinking aquatic feeds with high gelatinization and uniform pellet quality. They also handle a wider variety of raw materials and formulas without causing blockages or inconsistent expansion.
Q: How long does it take to change the die and cutter for different pellet sizes?
A: Changing the die and cutter to switch between different pellet shapes and sizes, from small fry starter feed to large adult feed, is a quick mechanical process. It typically takes less than an hour to swap the components and adjust the cutter speed. This flexibility allows commercial feed mills to produce multiple aquatic feed types on the same line efficiently.
Q: What does the on-site installation and warranty service include?
A: Our engineers travel to your site to install, commission the entire line, and train your operators in daily operation and safety. The service includes a 12-month warranty covering all major components, with spare parts supplied at cost and priority dispatch. We also provide lifetime remote technical support via video call and messaging apps to resolve any operational issues immediately.
Factory Trial and Customization
See Your Pellets Before You Sign
Jinan MT Machinery runs trials on your own raw materials at our factory in Shandong, China, and builds each machine around your recipe, output and local utilities.
Trial Run on Your Own Raw Materials
- Bring local corn, cassava or soybean meal and run it at our factory.
- Formula testing helps your technical team confirm expansion and pellet quality.
- Inspect the pellets and the workshop before production is scheduled.
Die, Screw and Heating Built to Your Spec
- Custom dies for the pellet sizes and shapes your market buys.
- Screw combination configured for your recipe and output target.
- Heating method matched to your local voltage and heat source.
- OEM and ODM available from our own factory.
Delivery and After-Sales
Packed for Export, Installed by Our Engineers
Every order leaves in anti-rust, moisture-proof wooden crates, and our engineers install it on site, train your operators and back it with a 12-month warranty.
Export Packing
- Wooden export crates
- Anti-rust and moisture-proof treatment
- Export logistics arranged with your team
On-Site Commissioning
- Engineers install at your plant
- Commissioning on site
- Hands-on training for your operators
12 months Warranty
- Spare parts at cost, shipped with priority
- Parts supply for 10+ years
- Lifetime remote support by video, WhatsApp and email
Same Category
Related Feed Machines
Compare these machines from the same category to match your output, feed type and plant layout.
sinking fish feed machine Floating Fish Feed Extruder Production Line Machine
sinking fish feed machine Fish Feed Production Line Making Machine For Fish
sinking fish feed machine Aquarium Fish Feed Production Line Manufacturer
sinking fish feed machine Fish Feed Machine Extruder for Aquatic Feed Production Line
Applications
Feed Types This Machine Serves
See the aquatic feed applications this machine is used for and the equipment behind each one.
Bottom Fish Sinking Feed
Farms raising bottom-feeding species need dense pellets that sink quickly and stay intact until the fish reach them, produced on sinking feed lines or… sinking fish feed machine · floating fish feed machine
Fish Fry Starter Feed
Hatcheries, nurseries and feed mills serving them produce fine starter feed for fry, working at the small end of the 0.9–15 mm pellet range.… floating fish feed machine · sinking fish feed machine
Shrimp & Crab Feed
Shrimp and crab farms and specialist feed mills need small, dense pellets for animals that graze slowly on the pond bottom. Because crustaceans nibble… other aquactic feed machine · sinking fish feed machineBuyer Guides
Fish Feed Machine Selection Guides
These guides help owners and process engineers compare feed equipment before committing to a line.
Oct 20, 2026 · Industry News Africa Cage Fish Feed Extruder Line Manufacturer for Sale
Overcoming feed spoilage in tropical waters is the primary bottleneck for Cage fish farming Africa, driving the urgent shift to local feed production. Achieving… Read This Guide
Oct 20, 2026 · Industry News Aquafeed Extruder Manufacturer: DS70/DS95 Floating Fish Feed Line for Sale
Navigating evolving aquafeed demand trends requires precise twin-screw extrusion to overcome high-protein formulation challenges and ensure optimal starch gelatinization for water stability. Mastering shear… Read This Guide
Oct 19, 2026 · News & Cases Meiteng Fish Feed Line Training for Overseas Operators | Manufacturer
A practical fish feed line training program resolves sinking pellets caused by improper energy balance in new extrusion lines. On-site debugging aligns parameters with… Read This GuideFAQ
Questions Before You Order
Buyers of Jinan MT Machinery feed machines most often ask about factory trials, delivery, payment and spare parts.
Can I test the machine with my own raw materials before ordering?
Yes. You can visit our factory and run a trial with your own raw materials before signing the contract. Formula testing is also available, so your technical team can check the results on local ingredients.
What is the delivery time?
Common standard models are in stock and delivered within 10 days. Custom solutions take 30–50 working days. Every line completes a full test run before it leaves the factory.
What payment terms do you accept?
We accept T/T and L/C, usually at sight, as well as Alibaba Trade Assurance. PayPal is available for small orders and Western Union for sample orders. D/P and D/A are considered only for long-term customers with good credit.
How do I get spare parts and support after installation?
Spare parts ship with priority at cost price, and parts supply continues for more than 10 years. The warranty runs 12 months, with lifetime remote support by video, WhatsApp and email. Preventive maintenance, emergency repair and staff training are also available.
What our customers say
“Floating pellets hold on the water for over six hours. On our old line half the feed sank within 30 minutes and we lost money on every bag.”
“One MT75 line runs floating tilapia feed and sinking feed for bottom feeders by changing the die and settings. No second line needed.”
“They tested our local cassava and rice bran blend at their factory before we signed, and the expansion ratio we got on site matched what they promised.”
Talk to the Factory
Get a Quote for Fish Feed Production Line Manufacturer Processing Plant
We reply within 24 hours with free process advice, a CAD and 3D workshop layout, and an itemized technical quotation.
- WhatsApp+86 186 1542 3372
- Emailmt@mtmachinery.com
- Response TimeWithin 24 hours