Jinan MT Machinery Co., Ltd.
Aquatic Fish Feed Extruder Processing Line
Aquatic Fish Feed Extruder Processing LineAquatic Fish Feed Extruder Processing LineAquatic Fish Feed Extruder Processing LineAquatic Fish Feed Extruder Processing LineAquatic Fish Feed Extruder Processing Line

Product Details

About Aquatic Fish Feed Extruder Processing Line

On-site commissioning and training — Our engineers travel to your facility to install the line, run trials with your local raw materials, and train your operators until the first perfect batch is produced.

Technical Specifications

Parameter Value
Product Type Aquatic Feed Production Line
Capacity 1000-1500 kg/h, 2000-3000 kg/h, 4000-6000 kg/h
Main Extruder Twin-screw extruder
Screw Type Co-rotating twin
Control System PLC, MCC, Mechanical button, Centralized control
Motor Siemens
Electric Parts ABB
Inverter Delta
Raw Materials Corn, cassava, soybean meal, fish meal, meat by-products, vitamins, minerals
Certification CE, ISO 9001:2015

Application Suitability

Industry Typical Products
Aquaculture Farms Tilapia floating pellets 2-6 mm, catfish feed, carp sinking pellets
Commercial Feed Mills Shrimp and crab feed 0.9-3 mm, fry starter feed, high-fat coated pellets

Why Half the Floating Feed Ends Up on the Pond Bottom

Inconsistent expansion rates ruin pellet buoyancy and sink your profit. When processing diverse local ingredients, poor screw configuration leads to dense, sinking pellets that pollute the water and waste expensive fish meal. I recall a project in Nigeria where unadjusted parameters caused half the cassava-based tilapia feed to sink straight to the bottom, completely ruining the batch. As a reliable aquatic fish feed production line manufacturer, we prevent this by locking in exact extrusion parameters through rigorous factory trials before shipment.

Aquatic fish feed production line layout and twin-screw extruder

Integrating the Line into Your Processing Workflow

An aquatic fish feed production line manufacturer must map every stage from raw material intake to final packaging to fit your specific facility footprint. We design the workflow around your target species and capacity, ensuring smooth material transitions between the mixer, extruder, and dryer. Whether you need a standalone extruder upgrade or a full OEM/ODM turnkey project, the entire system is calibrated to your exact production rhythm.

Navigating Raw Material and Processing Challenges

Local ingredient variations, especially the starch profile in cassava or corn, drastically alter dough viscosity and expansion behavior inside the barrel. Managing moisture content and degree of cook is critical, as under-processed feed loses water stability while over-processed feed destroys heat-sensitive vitamins. High-fat formulations for shrimp require precise vacuum coating to prevent surface oiliness, and frequent recipe changes demand rapid die swaps without sacrificing pellet uniformity. Selecting the right heating method—electric, gas, diesel, or steam—directly impacts your operational energy costs and temperature control precision.

Critical Processing Sections Explained

The twin-screw extruder acts as the heart of the operation, utilizing co-rotating screws to generate the necessary shear and heat for gelatinizing varied aquatic recipes. Downstream, the multi-layer dryer carefully reduces moisture to guarantee shelf life without cracking the pellets. For high-energy diets, the vacuum coater pulls oils and attractants deep into the pellet core, ensuring even distribution. Finally, the cooler stabilizes the product temperature, preparing it for the packing machine, while optional unverified sections like a preconditioner can be integrated to enhance steam penetration.

Multi-layer dryer and vacuum coater for aquatic feed

Hidden Costs of Choosing the Wrong Setup

Purchasing an improperly configured line inevitably leads to sinking pellets that aquaculture farms will reject outright. Inadequate drying capacity creates moldy stock during storage, while mismatched cutters produce irregular shapes that disrupt automated feeding systems. A bottleneck section, such as an undersized coater for high-fat recipes, forces the entire high-capacity extruder to idle, destroying your daily output targets.

Why Source Your Line from Us

We operate as a direct manufacturer with a dedicated testing workshop, meaning every aquatic fish feed production line is fully run and tested before it leaves our facility. Because screw configurations are the most easily misconfigured element for local raw materials, we mandate factory trials using your actual ingredients to nail down the parameters. You receive free process consultation, detailed CAD and 3D plant layouts, and an itemized technical quotation within 24 hours. Our engineers handle on-site installation and provide comprehensive operator training to ensure long-term stability. Every line includes a 12-month warranty, lifetime remote technical support, and priority spare parts dispatch.

Documentation & Delivery

  • CE certificate and ISO 9001:2015 quality management records
  • Factory test-run video using your specific raw materials
  • Third-party inspection reports available upon request
  • Detailed packing list and customs clearance documents
  • Export wooden crates with anti-rust and moisture protection

Installation, Utilities & Maintenance

  • Confirm power supply, voltage, and steam or gas heating compatibility
  • Verify floor layout, ceiling height, water, and compressed air access
  • Schedule routine die and cutter blade replacement and screw element wear checks
  • Implement standard dryer cleaning and oil seasoning system flushing protocols
  • Complete comprehensive operator training for daily maintenance and safety

Start Your Custom Line Configuration

To receive an accurate proposal, please provide your target product shapes, required capacity, local raw material profile, preferred heating method, and factory dimensions. In return, we will supply a complete line proposal, CAD/3D layout design, itemized quotation, and an invitation to witness a factory trial run with your ingredients.

Frequently Asked Questions

Q: How to determine the complete line configuration based on target capacity and pellet type?
A: The configuration depends on your hourly output and whether you need floating or sinking pellets. We select the appropriate extruder model and match it with a multi-layer dryer and vacuum coater sized to handle your specific moisture removal and fat coating requirements.

Q: Can the extrusion line process local raw materials like cassava or low-cost grain blends?
A: Yes, the co-rotating twin-screw extruder handles diverse starch sources effectively. We adjust the screw configuration and barrel temperature profile during factory trials using your exact local ingredients to ensure proper gelatinization and consistent pellet buoyancy.

Q: What is the difference between twin-screw and single-screw extruders for aquatic feed?
A: Twin-screw extruders offer superior mixing and self-cleaning capabilities, making them ideal for high-fat formulas and varied local raw materials. They provide precise control over shear and temperature, ensuring uniform expansion for both floating and sinking aquatic pellets compared to single-screw alternatives.

Q: How long does it take to change dies and cutters for different pellet shapes?
A: Die and cutter changes are designed for rapid execution to minimize downtime. Operators can swap tooling to produce different sizes for various fish life stages quickly, provided the correct spare parts are on hand and the line is properly cooled before maintenance.

Q: What does the overseas installation, commissioning, and after-sales support include?
A: Our engineers travel to your site to install the equipment, run test batches, and train your team on operation and safety. We also provide a 12-month warranty, lifetime remote video support, and priority dispatch for spare parts to ensure continuous production.

Factory Trial and Customization

See Your Pellets Before You Sign

Jinan MT Machinery runs trials on your own raw materials at our factory in Shandong, China, and builds each machine around your recipe, output and local utilities.

Overseas buyers watching a twin-screw fish feed extruder run in the factory workshop

Trial Run on Your Own Raw Materials

  • Bring local corn, cassava or soybean meal and run it at our factory.
  • Formula testing helps your technical team confirm expansion and pellet quality.
  • Inspect the pellets and the workshop before production is scheduled.
Book a Raw Material Trial
Technicians assembling a twin-screw extruder and die head on the factory production floor

Die, Screw and Heating Built to Your Spec

  • Custom dies for the pellet sizes and shapes your market buys.
  • Screw combination configured for your recipe and output target.
  • Heating method matched to your local voltage and heat source.
  • OEM and ODM available from our own factory.
Discuss Your Configuration
Wooden export crates with feed machinery being loaded onto a truck at the factory

Delivery and After-Sales

Packed for Export, Installed by Our Engineers

Every order leaves in anti-rust, moisture-proof wooden crates, and our engineers install it on site, train your operators and back it with a 12-month warranty.

Export Packing

  • Wooden export crates
  • Anti-rust and moisture-proof treatment
  • Export logistics arranged with your team

On-Site Commissioning

  • Engineers install at your plant
  • Commissioning on site
  • Hands-on training for your operators

12 months Warranty

  • Spare parts at cost, shipped with priority
  • Parts supply for 10+ years
  • Lifetime remote support by video, WhatsApp and email

FAQ

Questions Before You Order

Buyers of Jinan MT Machinery feed machines most often ask about factory trials, delivery, payment and spare parts.

Can I test the machine with my own raw materials before ordering?

Yes. You can visit our factory and run a trial with your own raw materials before signing the contract. Formula testing is also available, so your technical team can check the results on local ingredients.

What is the delivery time?

Common standard models are in stock and delivered within 10 days. Custom solutions take 30–50 working days. Every line completes a full test run before it leaves the factory.

What payment terms do you accept?

We accept T/T and L/C, usually at sight, as well as Alibaba Trade Assurance. PayPal is available for small orders and Western Union for sample orders. D/P and D/A are considered only for long-term customers with good credit.

How do I get spare parts and support after installation?

Spare parts ship with priority at cost price, and parts supply continues for more than 10 years. The warranty runs 12 months, with lifetime remote support by video, WhatsApp and email. Preventive maintenance, emergency repair and staff training are also available.

What our customers say

★★★★★
“Floating pellets hold on the water for over six hours. On our old line half the feed sank within 30 minutes and we lost money on every bag.”
— Emeka Nwosu, Plant Owner, Delta Aqua Feed, Nigeria
★★★★★
“One MT75 line runs floating tilapia feed and sinking feed for bottom feeders by changing the die and settings. No second line needed.”
— Md. Rafiqul Islam, Production Manager, Padma Fish Feed, Bangladesh
★★★★★
“They tested our local cassava and rice bran blend at their factory before we signed, and the expansion ratio we got on site matched what they promised.”
— Pham Quoc Bao, Technical Director, Mekong Aqua Feed, Vietnam

Talk to the Factory

Get a Quote for Aquatic Fish Feed Extruder Processing Line

We reply within 24 hours with free process advice, a CAD and 3D workshop layout, and an itemized technical quotation.